Versitron MCC-16RM Installationsanleitung PDF herunterladen (Seite 23)

23 www.versitron.com

4.2 SNMP Menu

Select [2] from Setup menu to perform SNMP related settings. The following figure illustrates the SNMP menu:

------------------------------------------------------

Snmp Menu

[0] Print this menu

[1] View Snmp Setting

[2] Set Snmp Name

[3] Set Snmp Location

[4] Set Snmp Contact

[5] Set Snmp Community

[6] Set Snmp Trap Manager

[7] Exit

Please Select (0-7 )....

INET>

------------------------------------------------------

SNMP related settings are:

Name Login name for the system (127 characters).

Location Location where the system is installed (127 characters).

Contact Contact person regarding the system (127 characters).

Community SNMP communities to which the system belongs and access rights to the system (R: read

only, W: read/write). Maximum of four communities are supported.

Trap manager IP address of the trap host to which a trap is issued and the trap community to which the

system belongs. A maximum of three trap hosts are supported.

[Esc] key can be used to abort unfinished setting.

4.3 View System Status

Select [3] from Setup menu to view system status. The system status is shown as follows:

---------------------------------------------------------------------------------------------

Power 1 Status: Good , Power 2 Status: Good

FAN status: Good

CPU status:

Cpu Type = ARM7, Flash Size = 512K, Sdram Size = 2M Bytes

Software version 1.xx

---------------------------------------------------------------------------------------------

Power status indicates the status of power modules 1 and 2 in the chassis.

Power Status: Good, Bad

FAN status indicates the status of system cooling fan.

FAN Status: Good, Bad

CPU information and software version are static information for reference.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Keine Kommentare

Versitron MCC-16RM Installationsanleitung Seite 23